Quote from: Red Riley on April 16, 2024, 05:36:59 AMI bought my Odyssey battery at the Batteries+ store. Pro tip: when it gets within a month or two of the guaranteed free replacement date, take it back and get a new one for free. They don't ask whether it's good or bad, they just hand you a new one.Is the guaranteed free replacement a Batteries+ thing or Odyssey battery thing?
Quote from: 94touring on May 09, 2024, 08:01:48 AMActually Dave the sensor should be facing upwards, typically between 3 and 9 oclock. It's to keep moisture out of the sensor and fouling it.
Quote from: MiniDave on May 09, 2024, 07:54:16 AMPlacement is not critical as to length, so anywhere after the Y pipe is good, but closer is better. You want it pointing downward, not up - so that any moisture can drain out. But, there's not a lot of room under there, so it goes where it will fit.The SS dash is 14 gauge SS sheet laminated over a marine plywood base, the 3 clock has a binnacle to house the stock cluster. I bought it from a guy in Florida probably 10 years ago.
I like the metal dash, I'm going to do something like that with my hot rod.....
I noticed the double gauge, this late model car should already have a temp gauge, doesn't it?
Quote from: cstudep on May 08, 2024, 08:29:00 PMI need to get this done on mine, I highly doubt mine will look that good though. Where is the best place on the exhaust to weld the bung in? After the Y pipe I assume but does it matter how far past? I know you are supposed to mount it so that it is pointed up a bit to keep moisture out of the sensor.Not much choice on my car I put it where it would fit under the car after the "y" collector which ends up just after the shifter. It's about half way from the "y" and the center resonator.
Quote from: 94touring on May 08, 2024, 08:14:42 PMThats a fancy bung! Show quality bung workThat's because my stainless welding skills aren't what you'd call pro. Making sure I had good penetration and full coverage created a lot of weld, best to grind it down so it didn't look like one of those Youtube vids where "my friend fixed my exhaust"