Restoration-Mini

Classifieds => Parts for sale/wanted => Topic started by: ADRay on May 16, 2021, 04:48:44 AM

Title: WANTED - CV Joints for rolling setup
Post by: ADRay on May 16, 2021, 04:48:44 AM
I'm looking for a used set of cv joints that someone might have kicking around. I want to set up my mini as a rolling chassis without having to take apart my drive shafts.

They would need to work with this disc brake setup:
https://www.7ent.com/products/cooper-s-disc-brake-conversion-kit-reproduction-sbr0059e.html

thanks
Title: Re: WANTED - CV Joints for rolling setup
Post by: bikewiz on May 18, 2021, 11:43:17 AM
I may have a set. I think I kept the old set. I'll look tonight.
Title: Re: WANTED - CV Joints for rolling setup
Post by: ADRay on May 18, 2021, 01:20:39 PM
thanks you sir
Title: Re: WANTED - CV Joints for rolling setup
Post by: bikewiz on May 19, 2021, 04:34:19 AM
Sorry Andy I guess I chucked them, I found pretty much everything else for a front end just not CV's.
Title: Re: WANTED - CV Joints for rolling setup
Post by: MiniDave on May 19, 2021, 07:01:11 AM
Mine are for drum brakes, if I still even have them. I also tend to chuck out stuff like this that I don't need anymore.....
Title: Re: WANTED - CV Joints for rolling setup
Post by: cstudep on May 19, 2021, 08:27:22 AM
Pretty sure I just tossed a pair of old axles out of a drum brake MK2 front end into the scrap pile the other day. They definitely were not pot/CV joint style but the old rubber u-joint style. If I understand what your trying to do I don't think you care about the inbound motor side, you just want the outer axle so you can bolt on the hubs?

Seems like the axle nut is a different size between the drum and disc brakes though, so not sure if they would work for your situation.
Title: Re: WANTED - CV Joints for rolling setup
Post by: Jimini II on May 19, 2021, 12:11:54 PM
Quote from: MiniDave on May 19, 2021, 07:01:11 AM
Mine are for drum brakes, if I still even have them. I also tend to chuck out stuff like this that I don't need anymore.....

Those will work if they are off the later pot joint style set up.
Title: Re: WANTED - CV Joints for rolling setup
Post by: ADRay on May 20, 2021, 04:23:48 AM
Quote from: cstudep on May 19, 2021, 08:27:22 AM
If I understand what your trying to do I don't think you care about the inbound motor side, you just want the outer axle so you can bolt on the hubs?

Yes. I'm looking to be able to set up the front hubs without driveshafts without taking mine apart. They could even be a pair that are damaged as far as where the drive shaft bolts on.

Thanks for looking George