Anyone have a source for a fuel pressure gauge adapter like this in the US:
https://www.carbuilder.com/us/fuel-pressure-gauge-inline-adapter-for-6mm-hose (https://www.carbuilder.com/us/fuel-pressure-gauge-inline-adapter-for-6mm-hose)
I am looking for a 1/4 inch adapter. I have a gauge and adapters I use for the injected cars, but I would like to test the output of the SU pump.
I can find lots of 5/16 adapters and versions with AN threads. Something with three 1/8 NPT female ports would do as I hopefully can find either 6 mm or 1/4 hose bard to 1/8 NPT somewhere.
It is not for a permanent installation.
Something like this?
https://www.homedepot.com/p/LTWFITTING-1-8-in-FIP-Brass-Pipe-Tee-Fitting-5-Pack-HF311205/313825523
https://www.homedepot.com/p/Everbilt-1-8-in-Barb-x-1-4-in-MIP-Brass-Adapter-Fitting-800049/300096270
yes, that will do.
I looked at our local hardware store, but did not think to check the orange place.
Also eventually found them at Summit as well
https://www.summitracing.com/parts/vpe-10860 (https://www.summitracing.com/parts/vpe-10860)
Yeah, brass is brass.
Grainger supply or McMaster Carr are also great sources for pretty much anything you can think of. Electrical, mechanical, hardware, etc. I even bought my door seals from McMaster Carr.